Planning

Week Sun. 03 Mon. 04 Tue. 05 Wed. 06 List

	Sun. 03	Mon. 04	Tue. 05	Wed. 06
08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00	On-site registration opening 16:00 - 18:00 (2h) On-site registration opening Buffet 18:00 - 21:00 (3h) Buffet	Welcome / Registration 8:00 - 9:30 (1h30) Welcome / Registration Opening Welcome adress 9:30 - 9:45 (15min) Opening Welcome adress Room 2+3: Saint Maur / Essarts Multiscale Contact Mechanics For Rough Surfaces With Applications To Rubber Friction, Adhesion And The Leakage Of Seals 9:45 - 10:30 (45min) Multiscale Contact Mechanics For Rough Surfaces With Applications To Rubber Friction, Adhesion And The Leakage Of Seals Room 2+3: Saint Maur / Essarts Bo Persson https://leeds-lyon2017.sciencesconf.org/data/program/Keynote_Persson_Abstract_Leeds_Lyon_2018.pdf Coffee break 10:30 - 11:00 (30min) Coffee break Capillary Effects On Friction: From Nanoconfined Ionic Liquids To Ski Friction 11:00 - 11:45 (45min) Capillary Effects On Friction: From Nanoconfined Ionic Liquids To Ski Friction Room 2+3: Saint Maur / Essarts Lydéric Bocquet https://leeds-lyon2017.sciencesconf.org/data/program/Keynote_Bocquet_Abstract_Leeds_Lyon_2019_1_.pdf Group picture 11:45 - 12:00 (15min) Group picture Lunch 12:00 - 13:40 (1h40) Lunch Restaurant / Ormes / Cèdres P4-1 Roughness & Adhesion P6-1 Friction and wear Lubricated contacts P5-1 Running-in & Tribosystems 13:40 - 15:00 (1h20) P4-1 Roughness & Adhesion Room 1: Amphithéâtre Chair: B Persson › THE EFFECT OF ROUGHNESS ON TRACTION BETWEEN CONTACTING BODIES - Junki Joe, University of Michigan 13:40-14:00 (20min) › How roughness affects adhesion, or, why does food wrap cling again? - Martin Müser, Universität des Saarlandes 14:00-14:20 (20min) › EFFECTS OF VISCOELASTICITY AND SURFACE ROUGHNESS ON RUBBER ADHESION - Leonid Dorogin, Forschungszentrum Jülich GmbH 14:20-14:40 (20min) › ON THE DEPENDENCY OF FRICTION ON LOAD: THEORY AND EXPERIMENT - Oleg Braun, Institute of Physics NASU 14:40-15:00 (20min) 13:40 - 15:00 (1h20) P6-1 Friction and wear Lubricated contacts Room 2: Saint Maur Chair: K Tanaka › STUDY OF THE EFFECTS OF GASOLINE CONTAMINATION IN ENGINE OIL ON FRICTION AND WEAR - Mahdiyar Nejadhamzeeigilani, IFS, School of Mechanical Engineering, University of Leeds 13:40-14:00 (20min) › THE INFLUENCE OF MICROPITTING ON THE FRICTION COEFFICIENT OF TWO LUBRICATED SURFACES - AN EXPERIMENTAL INVESTIGATION - Thomas Touret, Safran Transmission Systems, Ecole Catholique d'Arts et Métiers de Lyon, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] 14:00-14:20 (20min) › Friction Modifiers for Motorcycle Wet Clutch Applications: Is Compromise Necessary - David Gillespie, Croda Europe Ltd. 14:20-14:40 (20min) › EVALUATION AND IMPROVEMENT OF CAVITATION EROSION BEHAVIOUR OF DIFFERENT STEELS IN SALTWATER USING ELECTROCHEMICAL METHODS - Tobias Amann, Fraunhofer Institute for Mechanics of Materials IWM, Fraunhofer Institute for Mechanics of Materials 14:40-15:00 (20min) 13:40 - 15:00 (1h20) P5-1 Running-in & Tribosystems Room 3: Essarts Chair: A Clarke › ANALYSIS OF THE RUNNING-IN BEHAVIOR OF A THERMALLY SPRAYED COATING - Dominic Linsler, Karlsruhe Institute of Technology [Karlsruhe] 13:40-14:00 (20min) › Effect of thrust washer bearing surface characteristics on wear in a planetary gear train - Ellen Bergseth, KTH Royal Institute of Technology, Royal Institute of Technology 14:00-14:20 (20min) › Investigating Application of Honeycomb Abradable Lining in Aero-engine Turbine Stage - Zhang Boxiu, Boxiu Zhang 14:20-14:40 (20min) › The Tribological Performance of Gas Turbine Lubricants - Jake Airey, Department of Chemical Engineering 14:40-15:00 (20min) Coffee break 15:00 - 15:20 (20min) Coffee break P4-2 Roughness & Sealing P6-2 Dry friction and wear P5-2 Multi-facets of EHL 15:20 - 16:40 (1h20) P4-2 Roughness & Sealing Room 1: Amphithéâtre Chair: M Müser › VISCOELASTIC RECIPROCATING MOTION BETWEEN ROUGH INTERFACES - Putignano Carmine, Politecnico di Bari (ITALY) 15:20-15:40 (20min) › A SIMPLE EVALUATION OF STATIC SEALING PERFORMANCE OF ROUGH SURFACE USING WATERSHED CONCEPT - Satoshi Momozono, Tokyo Institute of Technology 15:40-16:00 (20min) › The contact between rough surfaces in presence of a fluid flow in the interface: a strong coupling scheme - Andrei Shvarts, Centre des Matériaux, MINES ParisTech, CNRS UMR 7633 16:00-16:20 (20min) › EFFECTS OF SURFACE ROUGHNESS ON LOCAL FRICTION AND TEMPERATURE DISTRIBUTIONS IN FRETTING CONTACTS - Wenjie Qin, Faculty of Engineering, University of Nottingham, School of Mechanical Engineering, Beijing Institute of Technology 16:20-16:40 (20min) 15:20 - 16:40 (1h20) P6-2 Dry friction and wear Room 2: Saint Maur Chair: V Yastrebov › Effect of tungsten carbide addition on the tribological behavior of Astaloy 85Mo powder consolidated via spark plasma sintering - Michell Cano, Surface Phenomena Laboratory, Polytechnic School of the University of Sao Paulo 15:20-15:40 (20min) › EFFECT OF ABRASIVE PARTICLE SIZE ON FRICTION AND WEAR BEHAVIOUR OF VARIOUS MICROSTRUCTURES WITH THE SAME CHEMICAL COMPOSITION AND SIMILAR HARDNESS LEVELS - Céline Trevisiol, Sorbonne Universités, Université de technologie de Compiègne, CNRS, UMR 7337 Roberval, Centre de recherche Royallieu 15:40-16:00 (20min) › SUBSURFACE DYNAMIC RECRYSTALLIZATION DONINATED WEAR MECHANISM OF NANOSTRUCTURED COPPER IN LOW-AMPLITUDE OSCILLATING - Han Zhong, Institute of Metal Research, CAS 16:00-16:20 (20min) 15:20 - 16:40 (1h20) P5-2 Multi-facets of EHL Room 3: Essarts Chair: C Hooke › THE EFFECT OF MOLECULAR STRUCTURE ON FLOW IN AN ELASTOHYDRODYNAMIC CONTACT - Stephen Jeffreys, Imperial College London 15:20-15:40 (20min) › Elastohydrodynamic lubrication and surface fatigue modelling of spur gears over the meshing cycle - Alastair Clarke, Cardiff University 15:40-16:00 (20min) › Friction on a border of mixed EHL contact - Petr Sperka, Brno University of Technology 16:00-16:20 (20min) › Thermomecanical study of high speed rolling element bearing: a simplified approach - dimitri NIEL, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne], ECAM Lyon, CEntre Technique des Industries Mécaniques 16:20-16:40 (20min) Coffee break 16:40 - 17:00 (20min) Coffee break P4-3 Contact Mechanics P1-1 Bio-interface and biotribology I P5-3 Hydodynamics and thin films 17:00 - 18:00 (1h) P4-3 Contact Mechanics Room 1: Amphithéâtre Chair: G Carbone › Hydrogel Contact Mechanics - Robert Carpick, Department of Mechanical Engineering and Applied Mechanics, University of Pennsylvania 17:00-17:20 (20min) › ADHESIVE CONTACT NEAR FULL CONTACT: GENERALIZED TABOR PARAMETER, LOADING AND UNLOADING FULL SOLUTION - michele ciavarella, Politecnico di Bari (ITALY) 17:20-17:40 (20min) › The role of Nayak's parameter in elastic contact of rough surfaces - Vladislav Yastrebov, Centre des Matériaux, MINES ParisTech, CNRS UMR 7633 17:40-18:00 (20min) 17:00 - 18:00 (1h) P1-1 Bio-interface and biotribology I Room 2: Saint Maur Chair: M Bryant › ASSESSMENT OF THE PERFORMANCE OF AGENTS USED TO INCREASE GRIP IN ROCK CLIMBING - Matt Carre, The University of Sheffield 17:00-17:20 (20min) › Effect of combinaion of proteins on frictional property for joint prosthesis materials - Kazuhiro Nakashima, Kyushu University 17:20-17:40 (20min) › WEAR PERFORMANCE AND MECHANICAL CHARACTERIZATION OF NEWLY DESIGNED UHMWPE/HYDROGEL COMPOSITES FOR APPLICATION IN ARTIFICIAL JOINTS - Juan-Carlos Baena, PhD Candidate 17:40-18:00 (20min) 17:00 - 18:00 (1h) P5-3 Hydodynamics and thin films Room 3: Essarts Chair: P Sperka › Slipping zones in microsystems for improved load support - Daniele Savio, Fraunhofer IWM, MicroTribology Center μTC 17:00-17:20 (20min) › THERMO-HYDRODYNAMIC FE-ANALYSIS OF JOURNAL BEARINGS: EFFICIENT COUPLING OF THE REYNOLDS AND NAVIER-STOKES EQUATIONS - Marcel Bauer, Technical University Darmstadt, Department of Mechanical Engineering, Institute of Applied Dynamics 17:20-17:40 (20min) › NUMERICAL AND EXPERIMENTAL STUDY OF WATER LUBRICATED SPIRAL GROOVE FACE SEALS - Noël BRUNETIERE, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI 17:40-18:00 (20min) Poster session 18:30 - 21:00 (2h30) Poster session Big Top (outside)	P1 M Carré (Invited) P3 T Kato (invited) P2 M Spuria (invited) 8:30 - 9:00 (30min) P1 M Carré (Invited) Room 1: Amphithéâtre Chair: B Bou Saïd › FRICTIONAL INTERACTIONS BETWEEN HANDS AND SPORTS EQUIPMENT - Matt Carré, Department of Mechanical Engineering, The University of Sheffield 08:30-09:00 (30min) 8:30 - 9:00 (30min) P3 T Kato (invited) Room 2: Saint Maur Chair: J Fontaine › POSSIBILITY OF ELASTO-HYDROSTATIC EVOLVED-GAS BEARING AS ONE OF THE MECHANISMS OF SUPERLUBRICITY - T Kato, Surface Science and Tribology Lab Department of Mechanical Engineering, School of Engineering, The University of Tokyo 08:30-09:00 (30min) 8:30 - 9:00 (30min) P2 M Spuria (invited) Room 3: Essarts Chair: A Saulot › FRICTION IN HIGH PERFORMANCE ENGINE - Marco SPURIA, Internal Combustion Engine Engineer 08:30-09:00 (30min) Break 9:00 - 9:10 (10min) Break P1-2 Bio-interface and biotribology II P3-1 Diamond-like carbon films in boundary lubrication P2-1 Automotive applications 9:10 - 10:30 (1h20) P1-2 Bio-interface and biotribology II Room 1: Amphithéâtre Chair: M Carré › Frictional coefficients of living vascular cell monolayers - Emily Clark, University of Leeds 09:10-09:30 (20min) › THE SELF-REPAIR BEHAVIOR OF CELL OVERLAY INDUCED BY THE SURFACE TEXTURE ON CO-CR-MO ALLOY - Liguo Qin, Xi’an Jiaotong University 09:30-09:50 (20min) › Tribology of Surfaces: A Study in Cartilaginous Tissue from Synovial Joints - Fausto Moreira, The University of Sydney - Ahmad Jabbarzadeh, The University of Sydney 09:50-10:10 (20min) › BIO-INSPIRED SURFACES FOR FUNCTIONAL AQUEOUS LUBRICATION. - Sufia Fatima, University of Leeds 10:10-10:30 (20min) 9:10 - 10:30 (1h20) P3-1 Diamond-like carbon films in boundary lubrication Room 2: Saint Maur Chair: T Kato › INFLUENCE OF TRIBOFILM FORMATION IN DLC–STEEL LINE CONTACTS ON FRICTION - Jakob Moder, Chair of Mechanical Engineering, Montanuniversität Leoben 09:10-09:30 (20min) › EFFECT OF MATING MATERIAL ON FRICTION AND WEAR PROPERTIES OF a-C:H DLC IN BOUNDARY BASE OIL LUBRICATION - Kouami Auxence Melardot ABOUA, Department of Mechanical Science and Engineering, Graduate School of Engineering, Nagoya University 09:30-09:50 (20min) › SLIDING WEAR BEHAVIOR OF DLC UNDER LUBRICATED CONDITIONS AT ELEVATED TEMPERATURES - Ashokraj Jayachandran, BAM Federal Institute for Materials Research and Testing 09:50-10:10 (20min) › THE IMPACT OF ANTIWEAR ADDITIVE ON SURFACE-FATIGUE PERFORMANCE OF DLC COATINGS IN ROLLING/SLIDING CONTACTS - siavash soltanahmadi, Institute of Functional Surfaces, School of Mechanical Engineering, University of Leeds, LS2 9JT, UK 10:10-10:30 (20min) 9:10 - 10:30 (1h20) P2-1 Automotive applications Room 3: Essarts Chair: M Spuria › LOCAL AND GLOBAL FRICTION PHENOMENA IN ROLLING AND SLIPPING TIRES - Gert Heinrich, Leibniz-Institut für Polymerforschung Dresden e. V. 09:10-09:30 (20min) › Improved Calculation of Load-Dependent Gear Losses by Consideration of so Far Disregarded Influences - Thomas Jurkschat, FZG - Gear Research Centre, Technical University of Munich (TUM) 09:30-09:50 (20min) › STUDY OF RUBBER/ROAD DRY FRICTION IN ROLLING SLIDING AND LINEAR SLIDING CONDITIONS - Jonas Bousmat, Laboratoire de Tribologie et Dynamique des Systèmes 09:50-10:10 (20min) › INFLUENCING FACTORS ON THE DECOUPLING OF INDUCED ROTATIONAL OSCILLATION BY WET-RUNNING MULTI-PLATE PACKAGES IN CONTROLLED SLIP MODE - Michael Basiewicz, IPEK – Institute of Product Engineering, Karlsruhe Institute of Technology 10:10-10:30 (20min) Coffee break 10:30 - 11:00 (30min) Coffee break P1-3 From cells to well-being P3-2 Lubricant additives for boundary lubrication I P2-2 Measurement technics for both tribology and rheology 11:00 - 12:20 (1h20) P1-3 From cells to well-being Room 1: Amphithéâtre Chair: J Tichy › WEAR CHARACTERISTICS OF UHMW POLYETHYLENE BY TWIST METHOD - Georgiana Chisiu, University POLITEHNICA of Bucharest 11:00-11:20 (20min) › MECHANICAL RESPONSE INDUCED BY CHANGE IN SHEAR STRENGTH AT THE SLIDING CONTACT BETWEEN A FINGER AND A MOLECULAR LAYER-COATED SOLID SURFACE - Saiko Aoki, Tokyo Institute of Technology 11:20-11:40 (20min) › EFFECTS OF DYNAMIC FRICTION ON OBLIQUE IMPACT BEHAVIOR OF GOLF BALLS - Kazuo Arakawa, Kyushu University 11:40-12:00 (20min) › Biotribological and mechanical analysis of total hip arthroplasty failure - patrick chaboche, Former head orthopaedic surgery department 12:00-12:20 (20min) 11:00 - 12:20 (1h20) P3-2 Lubricant additives for boundary lubrication I Room 2: Saint Maur Chair: S Mori › LOCAL OCCUPANCY OF VISCOELASTIC INTERFACES: A NEW RHEOLOGICAL PERSPECTIVE ON ANTIWEAR TRIBOFILMS - Abdel Dorgham, Institute of Functional Surfaces 11:00-11:20 (20min) › A COMPARATIVE STUDY OF THE TRIBOFILMS DERIVED FROM ZDDP AND THIADIAZOLE WITH FOCUS ON THE TRIBOFILM-MICROSTRUCTURE RELATIONSHIP AND ITS IMPACT ON ROUGHNESS - Jakub Jelita Rydel, SKF University Technology Centre, Department of Materials Science and Metallurgy, University of Cambridge 11:20-11:40 (20min) › ZDDP degradation and tribochemistry revealed by mass spectrometry - Nicole Dörr, AC2T research GmbH 11:40-12:00 (20min) › SYNERGISTIC EFFECTS OF IONIC LIQUIDS AND ZINC DIALKYLDITHIOPHOSPHATE (ZDDP) ON TRIBOLOGICAL PROPERTIES UNDER BOUNDARY LUBRICATION - Kaisei Sato, Department of Mechanical Engineering Graduate School of Tokyo University of Science [Tokyo] 12:00-12:20 (20min) 11:00 - 12:20 (1h20) P2-2 Measurement technics for both tribology and rheology Room 3: Essarts Chair: P Stempfle › Identification of Micro Tribological Phenomena on Metal Surfaces by SPM-AE In Situ Measurement - 11:00-11:20 (20min) › ADHESION AND FRICTION OF A METAL-POLYMER MATRIX COMPOSITE PILLAR - Bilsay Sümer Hacettepe University, Turgay Eray, Istanbul Technical University 11:40-12:00 (20min) › RESEARCH ON MAGNETIC MEMORY TESTING TECHOLOGY IN EVALUATING WEAR PHENOMENA AND WEAR MECHANISM - Bowen Shi, College of Mechanical and Transportation Engineering, China University of Petroleum 12:00-12:20 (20min) Lunch 12:20 - 14:00 (1h40) Lunch Restaurant / Ormes / Cèdres P2-3 Modelling P4-4 Texturing I P3-3 Solid lubrication processes of carbon-based materials 14:00 - 15:40 (1h40) P2-3 Modelling Room 1: Amphithéâtre Chair: L Bocquet › Elastodynamic sliding of a layer on a flat under coulomb's friction: velocity dependence, opening waves and supersonic slip pulses - Vladislav Yastrebov, Centre des Matériaux, MINES ParisTech, CNRS UMR 7633 14:00-14:20 (20min) › Micromechanics of adhesive wear: Did Archard get it right? - Ramin Aghababaei, École polytechnique fédérale de Lausanne 14:20-14:40 (20min) › NUMERICAL INVESTIGATION OF THE INTERACTION OF AN ULTRASONIC WAVE WITH A DISCOUNTINUOUS CONTACT INTERFACE - Vijigiri Vipul, Laboratoire de Tribologie et Dynamique des Systèmes 14:40-15:00 (20min) › SUPPRESSION OF FRICTION-INDUCED VIBRATIONS BY DAMPING FROM IN-PLANE ANGULAR MISALIGNMENT - Naohiro Kado, Nagaoka University of Technology 15:00-15:20 (20min) › A New Asperity-Scale Mechanistic Model of Tribocorrosive Wear: Synergistic Effects of Mechanical and Corrosive Wear - Ali Ghanbarzadeh, University of Leeds 15:20-15:40 (20min) 14:00 - 15:40 (1h40) P4-4 Texturing I Room 2: Saint Maur Chair: N Brunetière › EFFECT OF WAVINESS AND ROUGHNESS ON CYLINDER LINER FRICTION - Eduardo Tomanik, Surface Phenomena Laboratory of Polytechnic School of the University of São Paulo (LFS/USP - Mohamed El mansori, Ecole Nationale Supérieure d'Arts et Métiers, Aix-en-Provence 14:00-14:20 (20min) › STUDY ON EHL OIL FILM BEHAVIOR OF TEXTURED SURFACE BY THREE-WAVELENGTH INTERFEROMETRY METHOD - Junji Murata, JTEKT CORPORATION 14:20-14:40 (20min) › Effect of surface texture on friction anisotropy under boundary lubrication - Shota Ito, Graduate School of Tokyo University of Science 14:40-15:00 (20min) › Numerical and experimental investigation of surface textures - Andrea Codrignani, Karlsruhe Institute of Technology 15:00-15:20 (20min) › THEORETICAL AND EXPERIMENTAL INVESTIGATION OF LASER SURFACE TEXTURING FOR PISTON-RING FRICTION REDUCTION - Xuan Ma, Northwestern University, Harbin Engineering University 15:20-15:40 (20min) 14:00 - 15:40 (1h40) P3-3 Solid lubrication processes of carbon-based materials Room 3: Essarts Chair: R Carpick › Tribo-Chemistry of Diamond (111) in Contact with Water - Takuya Kuwahara, Fraunhofer IWM, MicroTribology Centrum μTC 14:00-14:20 (20min) › The electrostatic origin of polar hydrophobicity: wetting and friction of fluorine-terminated carbon surfaces - Gianpietro Moras, Fraunhofer IWM, MicroTribology Center μTC 14:20-14:40 (20min) › Low friction mechanism of chlorine-containing amorphous carbon films against aluminium alloy - Yuuki Tokuta, Tokyo Metropolitan Industrial Technology Research Institute Joto Branch 14:40-15:00 (20min) › Tribochemistry for Self-formation of Carbonaceous Tribo-layer in Sliding of Carbon Nitride Coatings - Naohiro Yamada, Tohoku University 15:00-15:20 (20min) › EFFECT OF CHEMICAL COMPOSITION OF TRIBOFILM FOR TRIBOLOGICAL PROPERTIES OF SOFT-METAL/DLC NANOCOMPOSITE COATINGS - Minoru Goto, National Institute of Technology, Ube College 15:20-15:40 (20min) Coffee break 15:40 - 16:10 (30min) Coffee break P2-4 Elastohydrodynamic lubrication P4-5 Texturing II P6-3 DLC/Coatings 16:10 - 17:50 (1h40) P2-4 Elastohydrodynamic lubrication Room 1: Amphithéâtre Chair: G Heinrich › Electrical Impedance Method for Measuring Oil Film Thickness and Metallic Contact Ratio in EHD Contacts - Taisuke Maruyama, NSK Ltd. 16:10-16:30 (20min) › Generation of Acoustic Emission from the Running-In and Subsequent Wear of a mixed-Elastohydrodynamic Contact - Simon Hutt, Cardiff University 16:30-16:50 (20min) › Experimental observation on the deformation of dimpled surface in soft-EHL conformal contacts - Binbin Su, Nanjing University of Aeronautics and Astronautics [Nanjing] - Xiaolei Wang, Nanjing University of Aeronautics and Astronautics [Nanjing] 16:50-17:10 (20min) › Collapse Behaviour of Solidified Film in Elastohydrodynamic Lubrication Conditions - Kazuyuki Yagi, Kyushu University 17:10-17:30 (20min) › TOF-SIMS ANALYSIS OF DEUTERIUM DISSOLVED INTO BEARING STEEL DURING LUBRICATION TEST -EFFECT OF ADDITIVE- - Yoshinori Fukushima, DENSO CORPORATION 17:30-17:50 (20min) 16:10 - 17:50 (1h40) P4-5 Texturing II Room 2: Saint Maur Chair: E Tomanik › VIRTUAL TEXTURED HYBRID BEARINGS - Stefan Lampaert, Delft University of Technology, Faculty 3mE, Department PME 16:10-16:30 (20min) › Frictional property with 3D capillary structured surface by selective laser melting - Hiroaki Maeda, Tokyo University of Science [Tokyo] 16:30-16:50 (20min) › CYLINDER BORE HONING PATTERN OPTIMIZATION FOR IMPROVED ENGINE FRICTION AND WEAR - OZGEN AKALIN, Istanbul Technical University 16:50-17:10 (20min) › IMPACT OF SURFACE TEXTURE ON FRICTION PERFORMANCE OF CRANKSHAFT BEARINGS - Sabeur MEZGHANI, Mechanics surfaces and materials processing - Mohamed El mansori, Mechanics surfaces and materials processing 17:10-17:30 (20min) 16:10 - 17:50 (1h40) P6-3 DLC/Coatings Room 3: Essarts Chair: C Héau › TEMPERATURE RISE OF NITROGENATED DIAMOND-LIKE CARBON DURING SLIDING: CONSIDERATION OF REAL CONTACT AREA - Shuji Yamamoto, Kanto Gakuin University Materials & Surface Engineering Research Institute 16:10-16:30 (20min) › TRIBOLOGICAL STUDY OF A MULTILAYER COATING OF Ta/ZrN PRODUCED BY DC MAGNETRON SPUTTERING ON AISI-361L STAINLESS STEEL - Carolina Hernandez-Navarro, Instituto Tecnológico de Celaya 16:30-16:50 (20min) › Wear acceleration mechanism of DLC films under boundary lubrication in the presence of molybdenum-containing lubricant additives - Hikaru Okubo, Tokyo University of Science [Tokyo] 16:50-17:10 (20min) › ACHIEVING SUPERLUBRICITY WITH FULLY-FORMULATED ENGINE LUBRICANTS - Dean Clarke, Infineum USA - Eduardo Tomanik, MAHLE 17:10-17:30 (20min) › Application of DLCs to engine valve train systems: Effects of coating both the cam and follower - MacDonald Ofune, University of Leeds 17:30-17:50 (20min) Banquet 18:30 - 23:00 (4h30) Banquet	P6 J Seabra (invited) P5 A Martini (invited) P4 JM Vacherand (invited) 8:30 - 9:00 (30min) P6 J Seabra (invited) Room 1: Amphithéâtre Chair: D Philippon › GREASE FORMULATION, FILM THICKNESS AND FRICTION - INFLUENCE ON ROLLING BEARING TORQUE LOSS - Jorge Seabra, DEMec, Faculdade de Engenharia, Universidade do Porto 08:30-09:00 (30min) 8:30 - 9:00 (30min) P5 A Martini (invited) Room 2: Saint Maur Chair: P Vergne › MECHANISTIC INSIGHTS INTO THE FUNCTION AND PERFORMANCE OF POLYMERIC VISCOSITY MODIFIERS - Ashlie Martini, University of California, Merced 08:30-09:00 (30min) 8:30 - 9:00 (30min) P4 JM Vacherand (invited) Room 3: Essarts Chair: T Lubrecht › FROM VEHICLES TO MOLECULES TIRE TRIBOLOGICAL PERFORMANCE BALANCE - Jean-Michel Vacherand, Michelin Technology center 08:30-09:00 (30min) Break 9:00 - 9:10 (10min) Break P6-4 Hydrodynamic and elastohydrodynamic lubrication P5-4 MD simulation of liquid interfaces P4-6 Rubber blends 9:10 - 10:30 (1h20) P6-4 Hydrodynamic and elastohydrodynamic lubrication Room 1: Amphithéâtre Chair: J Seabra › EXTENDED LUBRICATION THEORY FOR COMPRESSIBLE FLOW - John TICHY, Rensselaer Polytechnic Institute 09:10-09:30 (20min) › Numerical simulation of hydrodynamic lubrication by smoothed particle hydrodynamics method - Kentaro Tanaka, Tokyo University of Marine Science and Technology 09:30-09:50 (20min) › ELASTOHYDRODYNAMIC LUBRICATON OF ISOTHERMAL POINT CONTACTS AT ZERO ENTRAINMENT VELOCITY - Yang Zhao, City University of Hong Kong, Xi’an Jiaotong University 09:50-10:10 (20min) › Thermal Effects in Rough EHL Contacts - Chris Hooke, Univ Bermingham 10:10-10:30 (20min) 9:10 - 10:30 (1h20) P5-4 MD simulation of liquid interfaces Room 2: Saint Maur Chair: A Martini › ADSORBED FILM STRUCTURE OF AQUEOUS COPOLYMER LUBRICANTS CONFINED BETWEEN HYDRATED AND UNHYDRATED TiO2 SURFACES - Hongtao Zhu, University of Wollongong 09:10-09:30 (20min) › MOLECULAR DYNAMICS OF HYDROCARBON LUBRICANTS UNDER EXTREME PRESSURES: ATOMISTIC INSIGHTS INTO THE FREE VOLUME ANSATZ - Kerstin Falk, Fraunhofer IWM, MicroTribology Center μTC 09:30-09:50 (20min) › Ionic Liquids under Confinement: The Role of Anisotropy on Friction Performance - Konstantinos Gkagkas, Toyota Motor Europe (BELGIUM) 09:50-10:10 (20min) › UNDERSTANDING ACTION MECHANISMS OF AMINE-BASED FRICTION MODIFIERS THROUGH MOLECULAR SIMULATIONS - Rafael PEREIRA DE MATOS, Laboratoire de Tribologie et Dynamique des Systèmes, TOTAL S.A. 10:10-10:30 (20min) 9:10 - 10:30 (1h20) P4-6 Rubber blends Room 3: Essarts Chair: JM Vacherand › Study of adhesion and aging behavior of rubber blends analyzed under the Multiscale-Contact-Mechanics (MCM) and a theoretical kinetics framework of aging: Implications for their functionality - Leonid Dorogin 09:10-09:30 (20min) › RATE- AND STATE-DEPENDENT FRICTION MODEL FOR RUBBER-METAL CONTACT BASED ON THE ELASTOPLASTIC FORMULATION - Takeru Matsuura, Yokohama National University, Yokohama 240-8501, Japan 09:30-09:50 (20min) › Effects of Normal Load and Temperature on the Frictional Characteristics of Hydrogenated Nitrile Butadiene Rubber Composites with Varied Filler Concentration - Avinash Tiwari, PGI, FZ-Jülich, Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology 09:50-10:10 (20min) › Effect of Specimen Thickness on Growth of Real Contact Area of Rubber with Two-Dimensional Regular Wavy Surface - Kenji Matsuda, Kyushu Institute of Technology 10:10-10:30 (20min) Coffee break 10:30 - 11:00 (30min) Coffee break P6-5 Fretting and surface topography P3-4 Lubricant additives for boundary lubrication II P4-7 Roughness and averaging 11:00 - 12:20 (1h20) P6-5 Fretting and surface topography Room 1: Amphithéâtre Chair: S Fouvry › MICROSTRUCTURE SENSITIVITY OF FRETTING CRACK NUCLEATION FOR FERRITIC-PEARLITIC STEEL - Patrick Ashton, National University of Ireland Galway 11:00-11:20 (20min) › A NEW METHOD TO EVALUATE THE ENERGY DISSIPATION RESPONSE OF SURFACES UNDER FRETTING CONDITION - Julien Fortes Da Cruz, Laboratoire Quartz (fusion of LISMMA, L@RIS, ECS-Lab) 11:20-11:40 (20min) › An Investigation into the effect of lambda ratio on ZDDP topography utilising the AFM as a Post-Test Tribometer - Rachel Bingley, University of Leeds 11:40-12:00 (20min) › An extended Rp-Rf friction energy approach formalizing the normal force fluctuation effects on fretting wear rate. - Estelle Marc, Laboratoire de Tribologie et Dynamique des Systèmes, Den-Service d'études mécaniques et thermiques (SEMT), CEA, Université Paris-Saclay 12:00-12:20 (20min) 11:00 - 12:20 (1h20) P3-4 Lubricant additives for boundary lubrication II Room 2: Saint Maur Chair: T Amann › TRIBOCHEMICAL REACTION OF SODIUM POLYPHOSPHATE ON IRON OXIDE SURFACE IN METAL FORMING - Hongtao Zhu, Univ. Wollongong 11:00-11:20 (20min) › EFFECT OF TEMPERATURE ON TRIBOLOGICAL PERFORMANCE OF MoDTC - Masanori Komaba, KYODOYUSHI CO.,LTD. 11:20-11:40 (20min) › Tribological behaviour of steel against ceramic oxide Atmospheric Plasma Spray (APS) coating under boundary lubrication conditions - PUSHKAR DESHPANDE, ECL 11:40-12:00 (20min) › THE EFFECT OF CORROSION INHIBITORS ON FRICTION - Asad Jamal, Imperial College London, Department of Mechanical Engineering 12:00-12:20 (20min) 11:00 - 12:20 (1h20) P4-7 Roughness and averaging Room 3: Essarts Chair: I Krupka › THEORETICAL AND EXPERIMENTAL INVESTIGATION OF LASER SURFACE TEXTURING FOR PISTON-RING FRICTION REDUCTION - Xuan Ma, Northwestern University, Harbin Engineering University 11:00-11:20 (20min) › Tribological effects of the combustion chamber pressure along an extended Elrod-Adams model - Alfredo Jaramillo, Instituto de Ciências Matemáticas e de Computação 11:20-11:40 (20min) › STROKE-AVERAGED LOAD CARRYING CAPACITY AND FRICTION OF A ROTATED PARABOLIC-FLAT PISTON RING - Wan Ma, Jiangsu Normal University, School of Mechatronic Engineering, Xuzhou, 221116, PRC 11:40-12:00 (20min) › NUMERICAL IMPLEMENTATION OF ROUGHNESS EFFECTS ON FRICTION-INDUCED VIBRATIONS - Giovanna Lacerra, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne], Dipartimento d' Ingegneria Meccanica e Aerospaziale, University of Rome La Sapienza 12:00-12:20 (20min) Lunch 12:20 - 14:00 (1h40) Lunch Restaurant / Ormes / Cèdres P5-5 Wear and fretting modelling P3-5 Tribofilms in severe contacts P4-8 Polymers and contact 14:00 - 15:40 (1h40) P5-5 Wear and fretting modelling Room 1: Amphithéâtre Chair: Y Desplanques › Modelling the wear process in composite liner bearings - Alastair Clarke, Cardiff University 14:00-14:20 (20min) › Glaze layer protection modalities at high temperatures: from nanostructured wear debris to global dissipated energy - Siegfried Fouvry, Laboratoire de Tribologie et Dynamique des Systèmes 14:20-14:40 (20min) › COMBINED EXPERIMENTAL AND NUMERICAL SIMULATION OF ABRASIVE WEAR AND ITS APPLICATION TO A TILLAGE MACHINE COMPONENT - Andreas Pauschitz, AC2T research GmbH 14:40-15:00 (20min) › Predictive model of wear induced by low-loaded sliding impacts - Thibaut Souilliart, Den-Service d'études mécaniques et thermiques (SEMT), CEA, Université Paris-Saclay, Laboratoire de Tribologie et Dynamique des Systèmes, UMR CNRS 5513, Ecole Centrale de Lyon, Université de Lyon 15:00-15:20 (20min) › A FINITE ELEMENT TRANSPOSITION OF THE THIRD BODY CONCEPT TO PREDICT THE MAXIMUM WEAR DEPTH IN FRETTING WEAR - Pierre ARNAUD, Laboratoire de Tribologie et Dynamique des Systèmes 15:20-15:40 (20min) 14:00 - 15:40 (1h40) P3-5 Tribofilms in severe contacts Room 2: Saint Maur Chair: C Donnet › Bifunctional tribofilms derived from inorganic borate on heated rubbing interface - Bach Tran, Faculty of Engineering and Information Science, University of Wollongong 14:00-14:20 (20min) › ON THE GLAZE LAYER FORMATION IN ZINC AND MANGANESE PHOSPHATE COATINGS - Dennis Ernens, University of Twente [Twente], Shell Global Solutions BV 14:20-14:40 (20min) › EFFICACY OF COATINGS AND THERMOCHEMICAL TREATMENTS TO IMPROVE WEAR RESISTANCE OF AXIAL PISTON PUMPS - Schuhler Guillaume, Sorbonne Universités, Université de technologie de Compiègne, Actuation & Propeller Systems 14:40-15:00 (20min) › EVOLUTION OF THE THIRD BODY LAYER: DYNAMIC CAUSES AND CONSEQUENCES ON SQUEAL OCCURRENCE - Narinder SINGLA, Ecole Centrale de Lille, Laboratoire de mécanique de Lille 15:00-15:20 (20min) › Tribological properties of Ni-based composite coatings containing silver vanadate at elevated temperatures - jun wang, wang, nanjing university of science and technology - hang li, nanjing university of sscience and technology 15:20-15:40 (20min) 14:00 - 15:40 (1h40) P4-8 Polymers and contact Room 3: Essarts Chair: S Kosarieh › Fundamental Tribological Properties of Thick CPB - Keisuke Sato, Tokyo University of Sciences [Tokyo] 14:00-14:20 (20min) › EFFECT OF HIGH PERFORMANCE POLYMER COMPOSITES ON CONTACT TEMPERATURE DURING RUBBING - Annelise Jean-Fulcrand, Department of Mechanical Engineering - Imperial College London 14:20-14:40 (20min) › On stickiness criteria for nominally flat rough contacts - michele ciavarella, Politecnico di Bari (ITALY) 14:40-15:00 (20min) › Molecularly-assisted tuning of the friction laws in a Multi-asperity tribocontact - Philippe STEMPFLE, Institut FEMTO-ST 15:00-15:20 (20min) › Tribology of PTFE with Unusually Effective Nanofillers, including the Effect of Sliding Speed on Wear and Friction - Thierry Blanchet, RPI 15:20-15:40 (20min) Awards and Closure 15:40 - 16:10 (30min) Awards and Closure Room 1: Amphithéâtre

Online user: 1

RSS Feed