Planning
Sunday, September 3, 2017
Time |
Event |
|
16:00 - 18:00
|
On-site registration opening |
|
18:00 - 21:00
|
Buffet |
|
Monday, September 4, 2017
Time |
Event |
|
08:00 - 09:30
|
Welcome / Registration |
|
09:30 - 09:45
|
Opening Welcome adress (Room 2+3: Saint Maur / Essarts) |
|
09:45 - 10:30
|
Multiscale Contact Mechanics For Rough Surfaces With Applications To Rubber Friction, Adhesion And The Leakage Of Seals (Room 2+3: Saint Maur / Essarts) - Bo Persson |
|
10:30 - 11:00
|
Coffee break |
|
11:00 - 11:45
|
Capillary Effects On Friction: From Nanoconfined Ionic Liquids To Ski Friction (Room 2+3: Saint Maur / Essarts) - Lydéric Bocquet |
|
11:45 - 12:00
|
Group picture |
|
12:00 - 13:40
|
Lunch (Restaurant / Ormes / Cèdres) |
|
13:40 - 15:00
|
P4-1 Roughness & Adhesion (Room 1: Amphithéâtre) - Chair: B Persson |
|
13:40 - 14:00 |
› THE EFFECT OF ROUGHNESS ON TRACTION BETWEEN CONTACTING BODIES - Junki Joe, University of Michigan |
|
14:00 - 14:20 |
› How roughness affects adhesion, or, why does food wrap cling again? - Martin Müser, Universität des Saarlandes |
|
14:20 - 14:40 |
› EFFECTS OF VISCOELASTICITY AND SURFACE ROUGHNESS ON RUBBER ADHESION - Leonid Dorogin, Forschungszentrum Jülich GmbH |
|
14:40 - 15:00 |
› ON THE DEPENDENCY OF FRICTION ON LOAD: THEORY AND EXPERIMENT - Oleg Braun, Institute of Physics NASU |
|
13:40 - 15:00
|
P6-1 Friction and wear Lubricated contacts (Room 2: Saint Maur) - Chair: K Tanaka |
|
13:40 - 14:00 |
› STUDY OF THE EFFECTS OF GASOLINE CONTAMINATION IN ENGINE OIL ON FRICTION AND WEAR - Mahdiyar Nejadhamzeeigilani, IFS, School of Mechanical Engineering, University of Leeds |
|
14:00 - 14:20 |
› THE INFLUENCE OF MICROPITTING ON THE FRICTION COEFFICIENT OF TWO LUBRICATED SURFACES - AN EXPERIMENTAL INVESTIGATION - Thomas Touret, Safran Transmission Systems, Ecole Catholique d'Arts et Métiers de Lyon, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] |
|
14:20 - 14:40 |
› Friction Modifiers for Motorcycle Wet Clutch Applications: Is Compromise Necessary - David Gillespie, Croda Europe Ltd. |
|
14:40 - 15:00 |
› EVALUATION AND IMPROVEMENT OF CAVITATION EROSION BEHAVIOUR OF DIFFERENT STEELS IN SALTWATER USING ELECTROCHEMICAL METHODS - Tobias Amann, Fraunhofer Institute for Mechanics of Materials IWM, Fraunhofer Institute for Mechanics of Materials |
|
13:40 - 15:00
|
P5-1 Running-in & Tribosystems (Room 3: Essarts) - Chair: A Clarke |
|
13:40 - 14:00 |
› ANALYSIS OF THE RUNNING-IN BEHAVIOR OF A THERMALLY SPRAYED COATING - Dominic Linsler, Karlsruhe Institute of Technology [Karlsruhe] |
|
14:00 - 14:20 |
› Effect of thrust washer bearing surface characteristics on wear in a planetary gear train - Ellen Bergseth, KTH Royal Institute of Technology, Royal Institute of Technology |
|
14:20 - 14:40 |
› Investigating Application of Honeycomb Abradable Lining in Aero-engine Turbine Stage - Zhang Boxiu, Boxiu Zhang |
|
14:40 - 15:00 |
› The Tribological Performance of Gas Turbine Lubricants - Jake Airey, Department of Chemical Engineering |
|
15:00 - 15:20
|
Coffee break |
|
15:20 - 16:40
|
P4-2 Roughness & Sealing (Room 1: Amphithéâtre) - Chair: M Müser |
|
15:20 - 15:40 |
› VISCOELASTIC RECIPROCATING MOTION BETWEEN ROUGH INTERFACES - Putignano Carmine, Politecnico di Bari (ITALY) |
|
15:40 - 16:00 |
› A SIMPLE EVALUATION OF STATIC SEALING PERFORMANCE OF ROUGH SURFACE USING WATERSHED CONCEPT - Satoshi Momozono, Tokyo Institute of Technology |
|
16:00 - 16:20 |
› The contact between rough surfaces in presence of a fluid flow in the interface: a strong coupling scheme - Andrei Shvarts, Centre des Matériaux, MINES ParisTech, CNRS UMR 7633 |
|
16:20 - 16:40 |
› EFFECTS OF SURFACE ROUGHNESS ON LOCAL FRICTION AND TEMPERATURE DISTRIBUTIONS IN FRETTING CONTACTS - Wenjie Qin, Faculty of Engineering, University of Nottingham, School of Mechanical Engineering, Beijing Institute of Technology |
|
15:20 - 16:40
|
P6-2 Dry friction and wear (Room 2: Saint Maur) - Chair: V Yastrebov |
|
15:20 - 15:40 |
› Effect of tungsten carbide addition on the tribological behavior of Astaloy 85Mo powder consolidated via spark plasma sintering - Michell Cano, Surface Phenomena Laboratory, Polytechnic School of the University of Sao Paulo |
|
15:40 - 16:00 |
› EFFECT OF ABRASIVE PARTICLE SIZE ON FRICTION AND WEAR BEHAVIOUR OF VARIOUS MICROSTRUCTURES WITH THE SAME CHEMICAL COMPOSITION AND SIMILAR HARDNESS LEVELS - Céline Trevisiol, Sorbonne Universités, Université de technologie de Compiègne, CNRS, UMR 7337 Roberval, Centre de recherche Royallieu |
|
16:00 - 16:20 |
› SUBSURFACE DYNAMIC RECRYSTALLIZATION DONINATED WEAR MECHANISM OF NANOSTRUCTURED COPPER IN LOW-AMPLITUDE OSCILLATING - Han Zhong, Institute of Metal Research, CAS |
|
15:20 - 16:40
|
P5-2 Multi-facets of EHL (Room 3: Essarts) - Chair: C Hooke |
|
15:20 - 15:40 |
› THE EFFECT OF MOLECULAR STRUCTURE ON FLOW IN AN ELASTOHYDRODYNAMIC CONTACT - Stephen Jeffreys, Imperial College London |
|
15:40 - 16:00 |
› Elastohydrodynamic lubrication and surface fatigue modelling of spur gears over the meshing cycle - Alastair Clarke, Cardiff University |
|
16:00 - 16:20 |
› Friction on a border of mixed EHL contact - Petr Sperka, Brno University of Technology |
|
16:20 - 16:40 |
› Thermomecanical study of high speed rolling element bearing: a simplified approach - dimitri NIEL, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne], ECAM Lyon, CEntre Technique des Industries Mécaniques |
|
16:40 - 17:00
|
Coffee break |
|
17:00 - 18:00
|
P4-3 Contact Mechanics (Room 1: Amphithéâtre) - Chair: G Carbone |
|
17:00 - 17:20 |
› Hydrogel Contact Mechanics - Robert Carpick, Department of Mechanical Engineering and Applied Mechanics, University of Pennsylvania |
|
17:20 - 17:40 |
› ADHESIVE CONTACT NEAR FULL CONTACT: GENERALIZED TABOR PARAMETER, LOADING AND UNLOADING FULL SOLUTION - michele ciavarella, Politecnico di Bari (ITALY) |
|
17:40 - 18:00 |
› The role of Nayak's parameter in elastic contact of rough surfaces - Vladislav Yastrebov, Centre des Matériaux, MINES ParisTech, CNRS UMR 7633 |
|
17:00 - 18:00
|
P1-1 Bio-interface and biotribology I (Room 2: Saint Maur) - Chair: M Bryant |
|
17:00 - 17:20 |
› ASSESSMENT OF THE PERFORMANCE OF AGENTS USED TO INCREASE GRIP IN ROCK CLIMBING - Matt Carre, The University of Sheffield |
|
17:20 - 17:40 |
› Effect of combinaion of proteins on frictional property for joint prosthesis materials - Kazuhiro Nakashima, Kyushu University |
|
17:40 - 18:00 |
› WEAR PERFORMANCE AND MECHANICAL CHARACTERIZATION OF NEWLY DESIGNED UHMWPE/HYDROGEL COMPOSITES FOR APPLICATION IN ARTIFICIAL JOINTS - Juan-Carlos Baena, PhD Candidate |
|
17:00 - 18:00
|
P5-3 Hydodynamics and thin films (Room 3: Essarts) - Chair: P Sperka |
|
17:00 - 17:20 |
› Slipping zones in microsystems for improved load support - Daniele Savio, Fraunhofer IWM, MicroTribology Center μTC |
|
17:20 - 17:40 |
› THERMO-HYDRODYNAMIC FE-ANALYSIS OF JOURNAL BEARINGS: EFFICIENT COUPLING OF THE REYNOLDS AND NAVIER-STOKES EQUATIONS - Marcel Bauer, Technical University Darmstadt, Department of Mechanical Engineering, Institute of Applied Dynamics |
|
17:40 - 18:00 |
› NUMERICAL AND EXPERIMENTAL STUDY OF WATER LUBRICATED SPIRAL GROOVE FACE SEALS - Noël BRUNETIERE, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI |
|
18:30 - 21:00
|
Poster session (Big Top (outside)) |
|
Tuesday, September 5, 2017
Time |
Event |
|
08:30 - 09:00
|
P1 M Carré (Invited) (Room 1: Amphithéâtre) - Chair: B Bou Saïd |
|
08:30 - 09:00 |
› FRICTIONAL INTERACTIONS BETWEEN HANDS AND SPORTS EQUIPMENT - Matt Carré, Department of Mechanical Engineering, The University of Sheffield |
|
08:30 - 09:00
|
P3 T Kato (invited) (Room 2: Saint Maur) - Chair: J Fontaine |
|
08:30 - 09:00 |
› POSSIBILITY OF ELASTO-HYDROSTATIC EVOLVED-GAS BEARING AS ONE OF THE MECHANISMS OF SUPERLUBRICITY - T Kato, Surface Science and Tribology Lab Department of Mechanical Engineering, School of Engineering, The University of Tokyo |
|
08:30 - 09:00
|
P2 M Spuria (invited) (Room 3: Essarts) - Chair: A Saulot |
|
08:30 - 09:00 |
› FRICTION IN HIGH PERFORMANCE ENGINE - Marco SPURIA, Internal Combustion Engine Engineer |
|
09:00 - 09:10
|
Break |
|
09:10 - 10:30
|
P1-2 Bio-interface and biotribology II (Room 1: Amphithéâtre) - Chair: M Carré |
|
09:10 - 09:30 |
› Frictional coefficients of living vascular cell monolayers - Emily Clark, University of Leeds |
|
09:30 - 09:50 |
› THE SELF-REPAIR BEHAVIOR OF CELL OVERLAY INDUCED BY THE SURFACE TEXTURE ON CO-CR-MO ALLOY - Liguo Qin, Xi’an Jiaotong University |
|
09:50 - 10:10 |
› Tribology of Surfaces: A Study in Cartilaginous Tissue from Synovial Joints - Fausto Moreira, The University of Sydney - Ahmad Jabbarzadeh, The University of Sydney |
|
10:10 - 10:30 |
› BIO-INSPIRED SURFACES FOR FUNCTIONAL AQUEOUS LUBRICATION. - Sufia Fatima, University of Leeds |
|
09:10 - 10:30
|
P3-1 Diamond-like carbon films in boundary lubrication (Room 2: Saint Maur) - Chair: T Kato |
|
09:10 - 09:30 |
› INFLUENCE OF TRIBOFILM FORMATION IN DLC–STEEL LINE CONTACTS ON FRICTION - Jakob Moder, Chair of Mechanical Engineering, Montanuniversität Leoben |
|
09:30 - 09:50 |
› EFFECT OF MATING MATERIAL ON FRICTION AND WEAR PROPERTIES OF a-C:H DLC IN BOUNDARY BASE OIL LUBRICATION - Kouami Auxence Melardot ABOUA, Department of Mechanical Science and Engineering, Graduate School of Engineering, Nagoya University |
|
09:50 - 10:10 |
› SLIDING WEAR BEHAVIOR OF DLC UNDER LUBRICATED CONDITIONS AT ELEVATED TEMPERATURES - Ashokraj Jayachandran, BAM Federal Institute for Materials Research and Testing |
|
10:10 - 10:30 |
› THE IMPACT OF ANTIWEAR ADDITIVE ON SURFACE-FATIGUE PERFORMANCE OF DLC COATINGS IN ROLLING/SLIDING CONTACTS - siavash soltanahmadi, Institute of Functional Surfaces, School of Mechanical Engineering, University of Leeds, LS2 9JT, UK |
|
09:10 - 10:30
|
P2-1 Automotive applications (Room 3: Essarts) - Chair: M Spuria |
|
09:10 - 09:30 |
› LOCAL AND GLOBAL FRICTION PHENOMENA IN ROLLING AND SLIPPING TIRES - Gert Heinrich, Leibniz-Institut für Polymerforschung Dresden e. V. |
|
09:30 - 09:50 |
› Improved Calculation of Load-Dependent Gear Losses by Consideration of so Far Disregarded Influences - Thomas Jurkschat, FZG - Gear Research Centre, Technical University of Munich (TUM) |
|
09:50 - 10:10 |
› STUDY OF RUBBER/ROAD DRY FRICTION IN ROLLING SLIDING AND LINEAR SLIDING CONDITIONS - Jonas Bousmat, Laboratoire de Tribologie et Dynamique des Systèmes |
|
10:10 - 10:30 |
› INFLUENCING FACTORS ON THE DECOUPLING OF INDUCED ROTATIONAL OSCILLATION BY WET-RUNNING MULTI-PLATE PACKAGES IN CONTROLLED SLIP MODE - Michael Basiewicz, IPEK – Institute of Product Engineering, Karlsruhe Institute of Technology |
|
10:30 - 11:00
|
Coffee break |
|
11:00 - 12:20
|
P1-3 From cells to well-being (Room 1: Amphithéâtre) - Chair: J Tichy |
|
11:00 - 11:20 |
› WEAR CHARACTERISTICS OF UHMW POLYETHYLENE BY TWIST METHOD - Georgiana Chisiu, University POLITEHNICA of Bucharest |
|
11:20 - 11:40 |
› MECHANICAL RESPONSE INDUCED BY CHANGE IN SHEAR STRENGTH AT THE SLIDING CONTACT BETWEEN A FINGER AND A MOLECULAR LAYER-COATED SOLID SURFACE - Saiko Aoki, Tokyo Institute of Technology |
|
11:40 - 12:00 |
› EFFECTS OF DYNAMIC FRICTION ON OBLIQUE IMPACT BEHAVIOR OF GOLF BALLS - Kazuo Arakawa, Kyushu University |
|
12:00 - 12:20 |
› Biotribological and mechanical analysis of total hip arthroplasty failure - patrick chaboche, Former head orthopaedic surgery department |
|
11:00 - 12:20
|
P3-2 Lubricant additives for boundary lubrication I (Room 2: Saint Maur) - Chair: S Mori |
|
11:00 - 11:20 |
› LOCAL OCCUPANCY OF VISCOELASTIC INTERFACES: A NEW RHEOLOGICAL PERSPECTIVE ON ANTIWEAR TRIBOFILMS - Abdel Dorgham, Institute of Functional Surfaces |
|
11:20 - 11:40 |
› A COMPARATIVE STUDY OF THE TRIBOFILMS DERIVED FROM ZDDP AND THIADIAZOLE WITH FOCUS ON THE TRIBOFILM-MICROSTRUCTURE RELATIONSHIP AND ITS IMPACT ON ROUGHNESS - Jakub Jelita Rydel, SKF University Technology Centre, Department of Materials Science and Metallurgy, University of Cambridge |
|
11:40 - 12:00 |
› ZDDP degradation and tribochemistry revealed by mass spectrometry - Nicole Dörr, AC2T research GmbH |
|
12:00 - 12:20 |
› SYNERGISTIC EFFECTS OF IONIC LIQUIDS AND ZINC DIALKYLDITHIOPHOSPHATE (ZDDP) ON TRIBOLOGICAL PROPERTIES UNDER BOUNDARY LUBRICATION - Kaisei Sato, Department of Mechanical Engineering Graduate School of Tokyo University of Science [Tokyo] |
|
11:00 - 12:20
|
P2-2 Measurement technics for both tribology and rheology (Room 3: Essarts) - Chair: P Stempfle |
|
11:00 - 11:20 |
› Identification of Micro Tribological Phenomena on Metal Surfaces by SPM-AE In Situ Measurement - Alan Hase - Saitama Institute of Technology |
|
11:40 - 12:00 |
› ADHESION AND FRICTION OF A METAL-POLYMER MATRIX COMPOSITE PILLAR - Bilsay Sümer Hacettepe University, Turgay Eray, Istanbul Technical University |
|
12:00 - 12:20 |
› RESEARCH ON MAGNETIC MEMORY TESTING TECHOLOGY IN EVALUATING WEAR PHENOMENA AND WEAR MECHANISM - Bowen Shi, College of Mechanical and Transportation Engineering, China University of Petroleum |
|
12:20 - 14:00
|
Lunch (Restaurant / Ormes / Cèdres) |
|
14:00 - 15:40
|
P2-3 Modelling (Room 1: Amphithéâtre) - Chair: L Bocquet |
|
14:00 - 14:20 |
› Elastodynamic sliding of a layer on a flat under coulomb's friction: velocity dependence, opening waves and supersonic slip pulses - Vladislav Yastrebov, Centre des Matériaux, MINES ParisTech, CNRS UMR 7633 |
|
14:20 - 14:40 |
› Micromechanics of adhesive wear: Did Archard get it right? - Ramin Aghababaei, École polytechnique fédérale de Lausanne |
|
14:40 - 15:00 |
› NUMERICAL INVESTIGATION OF THE INTERACTION OF AN ULTRASONIC WAVE WITH A DISCOUNTINUOUS CONTACT INTERFACE - Vijigiri Vipul, Laboratoire de Tribologie et Dynamique des Systèmes |
|
15:00 - 15:20 |
› SUPPRESSION OF FRICTION-INDUCED VIBRATIONS BY DAMPING FROM IN-PLANE ANGULAR MISALIGNMENT - Naohiro Kado, Nagaoka University of Technology |
|
15:20 - 15:40 |
› A New Asperity-Scale Mechanistic Model of Tribocorrosive Wear: Synergistic Effects of Mechanical and Corrosive Wear - Ali Ghanbarzadeh, University of Leeds |
|
14:00 - 15:40
|
P4-4 Texturing I (Room 2: Saint Maur) - Chair: N Brunetière |
|
14:00 - 14:20 |
› EFFECT OF WAVINESS AND ROUGHNESS ON CYLINDER LINER FRICTION - Eduardo Tomanik, Surface Phenomena Laboratory of Polytechnic School of the University of São Paulo (LFS/USP - Mohamed El mansori, Ecole Nationale Supérieure d'Arts et Métiers, Aix-en-Provence |
|
14:20 - 14:40 |
› STUDY ON EHL OIL FILM BEHAVIOR OF TEXTURED SURFACE BY THREE-WAVELENGTH INTERFEROMETRY METHOD - Junji Murata, JTEKT CORPORATION |
|
14:40 - 15:00 |
› Effect of surface texture on friction anisotropy under boundary lubrication - Shota Ito, Graduate School of Tokyo University of Science |
|
15:00 - 15:20 |
› Numerical and experimental investigation of surface textures - Andrea Codrignani, Karlsruhe Institute of Technology |
|
15:20 - 15:40 |
› THEORETICAL AND EXPERIMENTAL INVESTIGATION OF LASER SURFACE TEXTURING FOR PISTON-RING FRICTION REDUCTION - Xuan Ma, Northwestern University, Harbin Engineering University |
|
14:00 - 15:40
|
P3-3 Solid lubrication processes of carbon-based materials (Room 3: Essarts) - Chair: R Carpick |
|
14:00 - 14:20 |
› Tribo-Chemistry of Diamond (111) in Contact with Water - Takuya Kuwahara, Fraunhofer IWM, MicroTribology Centrum μTC |
|
14:20 - 14:40 |
› The electrostatic origin of polar hydrophobicity: wetting and friction of fluorine-terminated carbon surfaces - Gianpietro Moras, Fraunhofer IWM, MicroTribology Center μTC |
|
14:40 - 15:00 |
› Low friction mechanism of chlorine-containing amorphous carbon films against aluminium alloy - Yuuki Tokuta, Tokyo Metropolitan Industrial Technology Research Institute Joto Branch |
|
15:00 - 15:20 |
› Tribochemistry for Self-formation of Carbonaceous Tribo-layer in Sliding of Carbon Nitride Coatings - Naohiro Yamada, Tohoku University |
|
15:20 - 15:40 |
› EFFECT OF CHEMICAL COMPOSITION OF TRIBOFILM FOR TRIBOLOGICAL PROPERTIES OF SOFT-METAL/DLC NANOCOMPOSITE COATINGS - Minoru Goto, National Institute of Technology, Ube College |
|
15:40 - 16:10
|
Coffee break |
|
16:10 - 17:50
|
P2-4 Elastohydrodynamic lubrication (Room 1: Amphithéâtre) - Chair: G Heinrich |
|
16:10 - 16:30 |
› Electrical Impedance Method for Measuring Oil Film Thickness and Metallic Contact Ratio in EHD Contacts - Taisuke Maruyama, NSK Ltd. |
|
16:30 - 16:50 |
› Generation of Acoustic Emission from the Running-In and Subsequent Wear of a mixed-Elastohydrodynamic Contact - Simon Hutt, Cardiff University |
|
16:50 - 17:10 |
› Experimental observation on the deformation of dimpled surface in soft-EHL conformal contacts - Binbin Su, Nanjing University of Aeronautics and Astronautics [Nanjing] - Xiaolei Wang, Nanjing University of Aeronautics and Astronautics [Nanjing] |
|
17:10 - 17:30 |
› Collapse Behaviour of Solidified Film in Elastohydrodynamic Lubrication Conditions - Kazuyuki Yagi, Kyushu University |
|
17:30 - 17:50 |
› TOF-SIMS ANALYSIS OF DEUTERIUM DISSOLVED INTO BEARING STEEL DURING LUBRICATION TEST -EFFECT OF ADDITIVE- - Yoshinori Fukushima, DENSO CORPORATION |
|
16:10 - 17:50
|
P4-5 Texturing II (Room 2: Saint Maur) - Chair: E Tomanik |
|
16:10 - 16:30 |
› VIRTUAL TEXTURED HYBRID BEARINGS - Stefan Lampaert, Delft University of Technology, Faculty 3mE, Department PME |
|
16:30 - 16:50 |
› Frictional property with 3D capillary structured surface by selective laser melting - Hiroaki Maeda, Tokyo University of Science [Tokyo] |
|
16:50 - 17:10 |
› CYLINDER BORE HONING PATTERN OPTIMIZATION FOR IMPROVED ENGINE FRICTION AND WEAR - OZGEN AKALIN, Istanbul Technical University |
|
17:10 - 17:30 |
› IMPACT OF SURFACE TEXTURE ON FRICTION PERFORMANCE OF CRANKSHAFT BEARINGS - Sabeur MEZGHANI, Mechanics surfaces and materials processing - Mohamed El mansori, Mechanics surfaces and materials processing |
|
16:10 - 17:50
|
P6-3 DLC/Coatings (Room 3: Essarts) - Chair: C Héau |
|
16:10 - 16:30 |
› TEMPERATURE RISE OF NITROGENATED DIAMOND-LIKE CARBON DURING SLIDING: CONSIDERATION OF REAL CONTACT AREA - Shuji Yamamoto, Kanto Gakuin University Materials & Surface Engineering Research Institute |
|
16:30 - 16:50 |
› TRIBOLOGICAL STUDY OF A MULTILAYER COATING OF Ta/ZrN PRODUCED BY DC MAGNETRON SPUTTERING ON AISI-361L STAINLESS STEEL - Carolina Hernandez-Navarro, Instituto Tecnológico de Celaya |
|
16:50 - 17:10 |
› Wear acceleration mechanism of DLC films under boundary lubrication in the presence of molybdenum-containing lubricant additives - Hikaru Okubo, Tokyo University of Science [Tokyo] |
|
17:10 - 17:30 |
› ACHIEVING SUPERLUBRICITY WITH FULLY-FORMULATED ENGINE LUBRICANTS - Dean Clarke, Infineum USA - Eduardo Tomanik, MAHLE |
|
17:30 - 17:50 |
› Application of DLCs to engine valve train systems: Effects of coating both the cam and follower - MacDonald Ofune, University of Leeds |
|
18:30 - 23:00
|
Banquet |
|
Wednesday, September 6, 2017
Time |
Event |
|
08:30 - 09:00
|
P6 J Seabra (invited) (Room 1: Amphithéâtre) - Chair: D Philippon |
|
08:30 - 09:00 |
› GREASE FORMULATION, FILM THICKNESS AND FRICTION - INFLUENCE ON ROLLING BEARING TORQUE LOSS - Jorge Seabra, DEMec, Faculdade de Engenharia, Universidade do Porto |
|
08:30 - 09:00
|
P5 A Martini (invited) (Room 2: Saint Maur) - Chair: P Vergne |
|
08:30 - 09:00 |
› MECHANISTIC INSIGHTS INTO THE FUNCTION AND PERFORMANCE OF POLYMERIC VISCOSITY MODIFIERS - Ashlie Martini, University of California, Merced |
|
08:30 - 09:00
|
P4 JM Vacherand (invited) (Room 3: Essarts) - Chair: T Lubrecht |
|
08:30 - 09:00 |
› FROM VEHICLES TO MOLECULES TIRE TRIBOLOGICAL PERFORMANCE BALANCE - Jean-Michel Vacherand, Michelin Technology center |
|
09:00 - 09:10
|
Break |
|
09:10 - 10:30
|
P6-4 Hydrodynamic and elastohydrodynamic lubrication (Room 1: Amphithéâtre) - Chair: J Seabra |
|
09:10 - 09:30 |
› EXTENDED LUBRICATION THEORY FOR COMPRESSIBLE FLOW - John TICHY, Rensselaer Polytechnic Institute |
|
09:30 - 09:50 |
› Numerical simulation of hydrodynamic lubrication by smoothed particle hydrodynamics method - Kentaro Tanaka, Tokyo University of Marine Science and Technology |
|
09:50 - 10:10 |
› ELASTOHYDRODYNAMIC LUBRICATON OF ISOTHERMAL POINT CONTACTS AT ZERO ENTRAINMENT VELOCITY - Yang Zhao, City University of Hong Kong, Xi’an Jiaotong University |
|
10:10 - 10:30 |
› Thermal Effects in Rough EHL Contacts - Chris Hooke, Univ Bermingham |
|
09:10 - 10:30
|
P5-4 MD simulation of liquid interfaces (Room 2: Saint Maur) - Chair: A Martini |
|
09:10 - 09:30 |
› ADSORBED FILM STRUCTURE OF AQUEOUS COPOLYMER LUBRICANTS CONFINED BETWEEN HYDRATED AND UNHYDRATED TiO2 SURFACES - Hongtao Zhu, University of Wollongong |
|
09:30 - 09:50 |
› MOLECULAR DYNAMICS OF HYDROCARBON LUBRICANTS UNDER EXTREME PRESSURES: ATOMISTIC INSIGHTS INTO THE FREE VOLUME ANSATZ - Kerstin Falk, Fraunhofer IWM, MicroTribology Center μTC |
|
09:50 - 10:10 |
› Ionic Liquids under Confinement: The Role of Anisotropy on Friction Performance - Konstantinos Gkagkas, Toyota Motor Europe (BELGIUM) |
|
10:10 - 10:30 |
› UNDERSTANDING ACTION MECHANISMS OF AMINE-BASED FRICTION MODIFIERS THROUGH MOLECULAR SIMULATIONS - Rafael PEREIRA DE MATOS, Laboratoire de Tribologie et Dynamique des Systèmes, TOTAL S.A. |
|
09:10 - 10:30
|
P4-6 Rubber blends (Room 3: Essarts) - Chair: JM Vacherand |
|
09:10 - 09:30 |
› Study of adhesion and aging behavior of rubber blends analyzed under the Multiscale-Contact-Mechanics (MCM) and a theoretical kinetics framework of aging: Implications for their functionality - Leonid Dorogin |
|
09:30 - 09:50 |
› RATE- AND STATE-DEPENDENT FRICTION MODEL FOR RUBBER-METAL CONTACT BASED ON THE ELASTOPLASTIC FORMULATION - Takeru Matsuura, Yokohama National University, Yokohama 240-8501, Japan |
|
09:50 - 10:10 |
› Effects of Normal Load and Temperature on the Frictional Characteristics of Hydrogenated Nitrile Butadiene Rubber Composites with Varied Filler Concentration - Avinash Tiwari, PGI, FZ-Jülich, Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology |
|
10:10 - 10:30 |
› Effect of Specimen Thickness on Growth of Real Contact Area of Rubber with Two-Dimensional Regular Wavy Surface - Kenji Matsuda, Kyushu Institute of Technology |
|
10:30 - 11:00
|
Coffee break |
|
11:00 - 12:20
|
P6-5 Fretting and surface topography (Room 1: Amphithéâtre) - Chair: S Fouvry |
|
11:00 - 11:20 |
› MICROSTRUCTURE SENSITIVITY OF FRETTING CRACK NUCLEATION FOR FERRITIC-PEARLITIC STEEL - Patrick Ashton, National University of Ireland Galway |
|
11:20 - 11:40 |
› A NEW METHOD TO EVALUATE THE ENERGY DISSIPATION RESPONSE OF SURFACES UNDER FRETTING CONDITION - Julien Fortes Da Cruz, Laboratoire Quartz (fusion of LISMMA, L@RIS, ECS-Lab) |
|
11:40 - 12:00 |
› An Investigation into the effect of lambda ratio on ZDDP topography utilising the AFM as a Post-Test Tribometer - Rachel Bingley, University of Leeds |
|
12:00 - 12:20 |
› An extended Rp-Rf friction energy approach formalizing the normal force fluctuation effects on fretting wear rate. - Estelle Marc, Laboratoire de Tribologie et Dynamique des Systèmes, Den-Service d'études mécaniques et thermiques (SEMT), CEA, Université Paris-Saclay |
|
11:00 - 12:20
|
P3-4 Lubricant additives for boundary lubrication II (Room 2: Saint Maur) - Chair: T Amann |
|
11:00 - 11:20 |
› TRIBOCHEMICAL REACTION OF SODIUM POLYPHOSPHATE ON IRON OXIDE SURFACE IN METAL FORMING - Hongtao Zhu, Univ. Wollongong |
|
11:20 - 11:40 |
› EFFECT OF TEMPERATURE ON TRIBOLOGICAL PERFORMANCE OF MoDTC - Masanori Komaba, KYODOYUSHI CO.,LTD. |
|
11:40 - 12:00 |
› Tribological behaviour of steel against ceramic oxide Atmospheric Plasma Spray (APS) coating under boundary lubrication conditions - PUSHKAR DESHPANDE, ECL |
|
12:00 - 12:20 |
› THE EFFECT OF CORROSION INHIBITORS ON FRICTION - Asad Jamal, Imperial College London, Department of Mechanical Engineering |
|
11:00 - 12:20
|
P4-7 Roughness and averaging (Room 3: Essarts) - Chair: I Krupka |
|
11:00 - 11:20 |
› THEORETICAL AND EXPERIMENTAL INVESTIGATION OF LASER SURFACE TEXTURING FOR PISTON-RING FRICTION REDUCTION - Xuan Ma, Northwestern University, Harbin Engineering University |
|
11:20 - 11:40 |
› Tribological effects of the combustion chamber pressure along an extended Elrod-Adams model - Alfredo Jaramillo, Instituto de Ciências Matemáticas e de Computação |
|
11:40 - 12:00 |
› STROKE-AVERAGED LOAD CARRYING CAPACITY AND FRICTION OF A ROTATED PARABOLIC-FLAT PISTON RING - Wan Ma, Jiangsu Normal University, School of Mechatronic Engineering, Xuzhou, 221116, PRC |
|
12:00 - 12:20 |
› NUMERICAL IMPLEMENTATION OF ROUGHNESS EFFECTS ON FRICTION-INDUCED VIBRATIONS - Giovanna Lacerra, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne], Dipartimento d' Ingegneria Meccanica e Aerospaziale, University of Rome La Sapienza |
|
12:20 - 14:00
|
Lunch (Restaurant / Ormes / Cèdres) |
|
14:00 - 15:40
|
P5-5 Wear and fretting modelling (Room 1: Amphithéâtre) - Chair: Y Desplanques |
|
14:00 - 14:20 |
› Modelling the wear process in composite liner bearings - Alastair Clarke, Cardiff University |
|
14:20 - 14:40 |
› Glaze layer protection modalities at high temperatures: from nanostructured wear debris to global dissipated energy - Siegfried Fouvry, Laboratoire de Tribologie et Dynamique des Systèmes |
|
14:40 - 15:00 |
› COMBINED EXPERIMENTAL AND NUMERICAL SIMULATION OF ABRASIVE WEAR AND ITS APPLICATION TO A TILLAGE MACHINE COMPONENT - Andreas Pauschitz, AC2T research GmbH |
|
15:00 - 15:20 |
› Predictive model of wear induced by low-loaded sliding impacts - Thibaut Souilliart, Den-Service d'études mécaniques et thermiques (SEMT), CEA, Université Paris-Saclay, Laboratoire de Tribologie et Dynamique des Systèmes, UMR CNRS 5513, Ecole Centrale de Lyon, Université de Lyon |
|
15:20 - 15:40 |
› A FINITE ELEMENT TRANSPOSITION OF THE THIRD BODY CONCEPT TO PREDICT THE MAXIMUM WEAR DEPTH IN FRETTING WEAR - Pierre ARNAUD, Laboratoire de Tribologie et Dynamique des Systèmes |
|
14:00 - 15:40
|
P3-5 Tribofilms in severe contacts (Room 2: Saint Maur) - Chair: C Donnet |
|
14:00 - 14:20 |
› Bifunctional tribofilms derived from inorganic borate on heated rubbing interface - Bach Tran, Faculty of Engineering and Information Science, University of Wollongong |
|
14:20 - 14:40 |
› ON THE GLAZE LAYER FORMATION IN ZINC AND MANGANESE PHOSPHATE COATINGS - Dennis Ernens, University of Twente [Twente], Shell Global Solutions BV |
|
14:40 - 15:00 |
› EFFICACY OF COATINGS AND THERMOCHEMICAL TREATMENTS TO IMPROVE WEAR RESISTANCE OF AXIAL PISTON PUMPS - Schuhler Guillaume, Sorbonne Universités, Université de technologie de Compiègne, Actuation & Propeller Systems |
|
15:00 - 15:20 |
› EVOLUTION OF THE THIRD BODY LAYER: DYNAMIC CAUSES AND CONSEQUENCES ON SQUEAL OCCURRENCE - Narinder SINGLA, Ecole Centrale de Lille, Laboratoire de mécanique de Lille |
|
15:20 - 15:40 |
› Tribological properties of Ni-based composite coatings containing silver vanadate at elevated temperatures - jun wang, wang, nanjing university of science and technology - hang li, nanjing university of sscience and technology |
|
14:00 - 15:40
|
P4-8 Polymers and contact (Room 3: Essarts) - Chair: S Kosarieh |
|
14:00 - 14:20 |
› Fundamental Tribological Properties of Thick CPB - Keisuke Sato, Tokyo University of Sciences [Tokyo] |
|
14:20 - 14:40 |
› EFFECT OF HIGH PERFORMANCE POLYMER COMPOSITES ON CONTACT TEMPERATURE DURING RUBBING - Annelise Jean-Fulcrand, Department of Mechanical Engineering - Imperial College London |
|
14:40 - 15:00 |
› On stickiness criteria for nominally flat rough contacts - michele ciavarella, Politecnico di Bari (ITALY) |
|
15:00 - 15:20 |
› Molecularly-assisted tuning of the friction laws in a Multi-asperity tribocontact - Philippe STEMPFLE, Institut FEMTO-ST |
|
15:20 - 15:40 |
› Tribology of PTFE with Unusually Effective Nanofillers, including the Effect of Sliding Speed on Wear and Friction - Thierry Blanchet, RPI |
|
15:40 - 16:10
|
Awards and Closure (Room 1: Amphithéâtre) |
|
|